Pump Stations
Home » Product » System Accessories » Pump Stations
Share to:

Pump Stations

Pump Stations

Full-twin

Active solar hot water systems require a circulation pump, and depending on the system format may also include a flow meter, temperature gauges, air separator, fill and drain valves and other components.  Pump stations incorporate all these components into a pre-engineered packaged system, improving reliability and greatly simplifying the installation process.  

 

Apricus offers pump stations for direct, indirect and drain back systems. 

Please follow the links below to learn more. 









  • Direct Flow Pump Station (North America)

The Apricus Direct Flow Pump Station (DFPS) is designed to be used in residential solar thermal systems where the installation site does not normally see freezing temperatures and potable water circulates through the collector(s). All components needed for the solar pumping center are included to streamline the installation process.

Key Features

  • 3/4" copper with quick connect fittings

  • Pre-plumbed and pre-wired

  • Integrated flow setter

  • Large temperature and pressure gauge

  • Flanged, stainless steel circulator

  • Pressure relief valve

  • Power outage drip valve

  • Advanced solar controller

  • Insulated EPP cover

  • Pressure tested in factory

 

Please note this pump station is available in North America only.

US-direct-flow-pump-station2




  • Closed Loop Pump Station (North America)

The Apricus Closed Loop Pump Station (CLPS) is designed to be used in residential solar thermal systems. All components were designed to streamline the installation process.

Key Features

  • 3/4" copper with quick connect fittings

  • Pre-plumbed and pre-wired

  • Integrated flow setter

  • Automatic air vent

  • Expansion tank and connection kit

  • Large temperature and pressure gauge

  • Flanged circulator

  • Differential controller

  • Insulated EPP cover

 
 
Please note this pump station is only available in North America.

closed_loop_pump_station_usa


 


  • Commercial Closed Loop Pump Station (North America)

The commercial pump station can be used in situations where the closed loop system has higher head and flow requirements. This pump station can be used with up to 10 x AP-30 collectors (2 banks of 5 AP-30).

Actual number of collectors may vary depending on flow rates, system components, etc.

Please contact your local Apricus representative for information on sizing.

 

Key Features

  • Fully assembled closed loop pump station

  • Pre-plumbed and pre-wired

  • Standard 1" copper pipe sized connections

  • Air separator and automatic air vent

  • Combined temperature and pressure gauge

  • Flanged circulator

 

Please note this pump station is only available in North America.

US-commercial-closed-loop-pump-station



  • Closed Loop Pump Stations (International)


Apricus offers 4 different closed loop pump station models ranging from a basic single line model through to full twin line with all required components for a professional domestic closed loop solar water heating system.  

Apricus offers a separate range of pump station in North America including direct flow and closed loop domestic and closed loop commercial models. 


Closed Loop Pump Station Models

Name: Single Line Pump Station

Part #: PSA-SL-01

Features:

  • Grundfos or Wilo 3 Speed Pump

  • Temperature Gauge

  • Flow Gauge and Setter

  • EPP Foam Casing

PSA-SL-01

Name: Single Line Pump Station

Part #: PSA-SL-02

Features:

  • Grundfos or Wilo 3 Speed Pump

  • Temperature Gauge

  • Pressure Relief Valve & connection for Expansion Tank

  • Flow Gauge & Setter with Fill & Drain connections

  • EPP Foam Casing

PSA-SL-02

Name: Twin Line Pump Station

Part #: PSA-TL-01

Features:

  • Grundfos or Wilo 3 Speed Pump

  • Flow & Return Temperature Gauges

  • Pressure Relief Valve & connection for Expansion Tank

  • Flow Gauge & Setter with Fill & Drain connections

  • EPP Foam Casing

PSA-TL-01

Name: Twin Line Pump Station

Part #: PSA-TL-02

Features:

  • Grundfos or Wilo 3 Speed Pump

  • Flow & Return Temperature Gauges

  • Pressure Relief Valve & connection for Expansion Tank

  • Flow Gauge & Setter with Fill & Drain connections

  • Air Separator with Manual Vent

  • EPP Foam Casing

PSA-TL-02


Founded in 2003 by Australian Mick Humphreys with a specific focus on solar thermal solutions, Apricus has since grown into a global company with distribution and support offices worldwide. 

QUICK LINKS

CONTACT US

19 Pu Si Road, Pukou New and High Tech Development Zone, Nanjing, China, 210061
 Ph: +86 25 58649133     
 Fax: +86 25 58648103
 Email: service@apricus.com

Inquiry
Copyright © 2019 Apricus Solar Co. Ltd. All rights reserved.
Designed by Leadong.